Workstations

Workstation Operating instructions
J-136 / J139 / K110 / K111

1. Power on Video Projector & Stereo Receiver:
   *The Projector should be turned on first to receive the signal from the computer.
   
   
2. Computer
   To use the Computer: Mac/PC power on. Then Select (Computer #1)on the LCD projector.
   
   *The LCD Projector will remember the last source it has seen. /RGB Btn. for Computer/Video Btn. for PadCam/VHS.
   
   *If the computer won't show, do a restart this will re-transmit the signal to the projector.
   
   
3. Video
   To use any Video source:
   Select (Video #1) on the LCD projector remote & the proper source on the Sony receiver.
   
   • All video sources must be selected through the Sony receiver.
     
   • Video #1) Pad Camera -Video signal
     
   • Video #2) VHS Player-Video signal &audio
     
   • Video #3) Computer -Audio
     
   • Source #4 - #7) Open
   
   
4. Pad Camera
   To use the Pad camera:
   
   Power the pad camera on:
   The pad camera power switch is at the back of the unit, right next to the power cord.
   
   Select (Video #1) on the LCD Projector.
   
   
   
5. Audio
   On the receiver:
   Use the remote to switch between the AV sources for audio/video signals.
   
   switch the audio you need on the desktop switcher.
   Right Dial is your Volume control only.
   
   *Speaker select: should remain on speaker"B" for room speakers.